@X00
@X38@X3B@X0B
@X38 @X3EHelp: @X3FConfiguration (T)oggles                                              @X3B@X0B
@X38@X3B@X0E

      These toggles allow you to configure certain features and disable
      certain features within LoopBack.
@X0F
   Subcommands

      @X0BH               Help. @X03 Displays the file you are currently reading.

      @X0BP               Rotate page. @X03 Rotates the page to show more toggles
                      that you can configure.

      @X0BQ               Quit. @X03 Quits back to the main configuration menu.

      @X0B1               Allow international callbacks. @X03 Set this toggle equal to
                      yes if you want LoopBack to callback international
                      numbers.  Set this equal to no if you do not want LoopBack
                      to callback international numbers.

      @X0B2               User's time adjustment.@X03  Set this equal to (R)eplace time
                      if you wish to have the time value (defined in settings)
                      replace the user's time.  Set this equal to (A)dd time if
                      you wish to have the time value added to the user's time.

      @X0B3               Message type to send to SysOp. @X03 Set this equal to
                      (I)nternal if you want the built-in message sent to the
                      SysOp after a successful verification.  (E)xternal will
                      send an external message to the sysop after a successful
                      verification. (Filename defined in Paths)  (N)one will
                      disable any type of message being written to the SysOp

      @X0B4               Message type to send to user.  @X03Set this equal to
                      (I)nternal if you want the built-in message send to the
                      user after a successful verification.  (E)xternal will
                      send an external message to the user after a successful
                      verification.  (Filename defined in Paths)  (N)one will
                      disable any type of message being written to the user.

      @X0B5               Comment to use.  @X03Set this equal to (P)hone if you want
                      LoopBack to stamp a comment with the phone number used
                      to call the user back to the users file.  (D)ate will
                      stamp a comment with the time & date verified to the
                      user's file.  (B)oth will stamp both the date/time &
                      phone number.  (N)one will disable any kind of comment
                      stamping.

      @X0B6               Check user's name.  @X03Set this equal to yes if you want
                      LoopBack to ask the user for his/her name upon callback
                      verification.  Set this equal to no if you want to
                      bypass this question.

     @X0B 7               Check user's password.  @X03Set this equal to yes if you
                      want LoopBack to ask the user for his/her password upon
                      callback verification.  Set this equal to no if you want
                      to bypass this question.

     @X0B 8               Check user's verification string.  @X03Set this equal to yes
                      if you want LoopBack to ask the user for his/her
                      verification string (mother's maiden name) upon callback
                      verification.  Set this equal to no if you want to bypass
                      this question.

     @X0B 9               Check user's city.  @X03Set this equal to yes if you want
                      LoopBack to ask the user for his/her city (calling from)
                      upon callback verification.  Set this equal to no if you
                      want to bypass this question.

     @X0B10               Upgrade local callers.  @X03Set this equal to yes if you
                      want LoopBack to upgrade the status of local callers.  Set
                      this equal to no if you do not want LoopBack to upgrade
                      the status of local callers.  You may want to set this to
                      no if you, the SysOp, will be frequently testing LoopBack
                      Locally.

     @X0B11               Update user's data phone #.  @X03Set this equal to yes if
                      you want LoopBack to change the user's data phone # to
                      the phone # that was called back.  Set this equal to
                      no if you want to leave the user's data phone # alone.

     @X0B12               Verify user's city.  @X03Set this equal to yes if you want
                      LoopBack to verify the user's name & city (for large
                      systems that may have two users with the same name)
                      after the user enters his/her name for verification.
                      Set this equal to no to bypass this question.

     @X0B13               Allow user to use logoff command.  @X03Set this equal to
                      yes if you want the user to be able to logoff (Goodbye)
                      the BBS through LoopBack without undergoing the
                      verification process.  Set this equal to no to disable
                      the (G)oodbye command.

     @X0B14               Allow user to return to main.  @X03Set this equal to yes if
                      you want the user to be able to exit from LoopBack
                      without undergoing the verification process.  Set this
                      equal to no to disable to (R)eturn command.

     @X0B15               Allow multiple callbacks.  @X03Set this equal to yes if you
                      want LoopBack to allow numbers found in the "already used"
                      number trashfile to be called back again.  Set this equal
                      to no to only allow those numbers that are not found in
                      the "already used" number trashfile to be called back.

     @X0B16               Allow trash file display.  @X03Set this equal to yes if you
                      want LoopBack to show the user who was called back with
                      the number that he/she entered. (Only on systems that
                      have multiple callbacks disabled).  Set this equal to no
                      if you do not want the information displayed.

     @X0B17               Place to put date comment.  @X03A mini menu will be displayed
                      allowing you to enter where you want the date comment
                      stamped in the users file.  It can be placed in the users
                      file comment #1, #2, or in any 5 of the User Notes PSA
                      fields.

     @X0B18               Place to put phone comment.  @X03A mini menu will be
                      displayed allowing you to enter where you want the phone
                      comment stamped in the users file.  It can be placed in
                      the users file comment #1, #2, or in any 5 of the User
                      Notes PSA fields.

     @X0B19               File type to execute at end.  @X03Set this equal to (P)pe if
                      you want LoopBack to call a ppe after the user if verified
                      but before he/she is upgraded.  (B)atch file will tell
                      LoopBack to shell out to a DOS batch file.  (N)one will
                      tell LoopBack to bypass file execution.  (File to execute
                      is defined in paths)

     @X0B20               Broadcast messaging control.  @X03Set this equal to (A)llow
                      if you want to allow the user in LoopBack to receive
                      broadcast messages.  Set this equal to (D)o not allow if
                      you do not want the user in LoopBack to be able to receive
                      broadcast messages.  If you have this set to (D)o not
                      allow, LoopBack will update the USERNET.XXX file to show
                      that the user is "Out to DOS" instead of "Unavailable for
                      Chat".  This will prevent any broadcast messages from
                      getting through.

     @X0B21               Hangup on bad numbers.  @X03Set this equal to yes if you want
                      LoopBack to hangup on the user if he/she enters a number
                      that was found in the Bad Number database.  Set this
                      equal to no if you would like LoopBack to just exit back
                      to the BBS instead of hanging up on the user.

     @X0B22               Immediately start download.  @X03Set this equal to yes if you
                      want LoopBack to initiate the download process after
                      flagging the file for download.  Set this equal to no if
                      you don't want to immediately start the download process
                      after flagging a file for download.

     @X0B23               Check Caller-ID string.  @X03Set this equal to yes if you
                      want LoopBack to check the caller-id string for both of
                      the user's phone numbers.  (Data & Home)  If LoopBack
                      finds either the data or home phone # in the caller-id
                      string, then it will upgrade the user with all the
                      default levels (as defined in Configuration Settings) and
                      return back to the BBS without initiating a callback.  If
                      the neither of the user's phone #s are found in the
                      caller-id string, then LoopBack will simply proceed to the
                      LoopBack Main Menu as normal.

@WAIT@
