  SVGA 1024 NI Drivers (supports Windows 3.0) for 4825SX/4850EP

*** Requires High Density Disk ***

These drivers enable the user to run several software applications
under the VGA 1024 video controller's Super VGA screen modes. The
list of screen modes and the software applications are listed in the
README.DOC file on this diskette. These drivers are for the
TANDY 4825 SX, and 4850 EP computers.


This disk contains the following files--

   README.TXT     TRANSLAT.BAT   README.DOC     LOOK.COM
   ACAD.LIF       CADVANCE.LIF   FRAMEWRK.LIF   GEM3.LIF
   GENERIC.LIF    INSTALL.EXE    INSTALL.DAT    INSTALL.LIF
   INSTALL.00     LOTUS.LIF      OS2800.DLL     OS2800.DDP
   OS21024.DLL    OS21024.DDP    PCAD.LIF       UTILITY.LIF
   VCAD.LIF       WIN3.LIF       WP.LIF         WS3_3.LIF
   DISK.ID


In order to obtain a printout of this README.TXT file, insert this
disk in Drive A, make sure your printer is switched on, is on line,
and at the C:\> prompt, type the following command--

   PRINT A:README.TXT

and press <Enter>.


The installation instructions for these drivers are included in the
README.DOC file on this diskette. In order to print the README.DOC
file, insert this drivers disk in Drive A. At the C:\> prompt,
type in the following--

   PRINT A:README.DOC

and press <Enter>. The README.DOC file is 39 pages long.

NOTE:
   * The installation instructions for drivers for Windows 3.0 are
     on Page 28 of the README.DOC file.


NOTE:
"While reasonable efforts have been taken in the preparation of this
information to assure its accuracy, Tandy Corporation/Radio Shack
assumes no liability resulting from the use of the information
contained herein."
