                                   STACKS
                  Supports the dynamic use of data stacks
                           See also <CONFIG.SYS>

COMMAND TYPE: System configuration      VERSION: 4.0 and up

USE: STACKS=n,s

n   number of stacks (0-64)
s   size of each stack (0-512) in bytes

When there is a hardware interrupt, MSDOS can switch stacks and allocate a
new one from the number specified in the STACKS command.  If STACKS=0,0 is
specified, no stack switching occurs at interrupt time.

DEFAULTS:
   IBM PC/XT/PC-portable    0,0
   IBM AT and PS/2 family   9,128

NOTE: This command should be placed in <CONFIG.SYS> and is not a normal DOS
command.
