                                  BUFFERS
                  Sets the number of disk buffers allowed.

COMMAND TYPE: System Configuration      VERSION: 2.0 and up

USE: BUFFERS = n[,m] [/x]

n  must be a value from 1 to 99 specifying the number of buffers to be
   used.  The default value is two buffers.

MSDOS 4.x only:
m  is is maximum number of sectors that can be read or written in one
   operation [1-8], default is 1
/x places the buffers in expanded memory (the number of buffers may
   then be up to 10000)

For disk intensive applications such as a database, more buffers are
recommended.  Adding more buffers can speed up certain applications.
However, if you set the number of buffers over 20 it may begin to slow
down applications.

NOTE: This command must be placed in the <CONFIG.SYS> file and is not a
normal DOS command.
