Revision history of GIFXTS - See GIFXTS.TXT for COMPLETE details

December 1992 - Version 3.5
    1) Fixed EGA Monochrome support

November 1992 - Version 3.4
    1) Added EGA Monochrome support
    2) The program could not be run from the root directory - FIXED

November 1992 - Version 3.3
    1) When using the INFORMATION menu to change the height of the image, the
       resulting image was "off" - FIXED
    2) When using the INFORMATION menu to change the height and/or width  of
       the image, "garbage" symbols were added to the right and bottom - FIXED
    3) When returning from using the INFORMATION menu to change the height
       and/or width of the image, the 'X' was not responding correctly - FIXED


October 1992 - Version 3.2
    1) added CGA support
    2) when reading gifxts.cfg file program terminated with a divide by 0
       error - FIXED
    3) when saving an XTS file, if the Stitches/inch or Rows/inch had decimal
       point positions (ie 15.25) the numbers after the decimal point were
       lost - FIXED
    4) When changing the color PALETTE, the screen was not restored correctly
       - FIXED

October 1992 - Version 3.1
    1) Amount of free memory reduced to 532000 BYTES
    2) In View mode, after scrolling IMAGE, box disappeared - FIXED
    3) When using FILE MENU, and changeing directory or drive, cursor
       disappeared - FIXED

October 1992 - Version 3.0

     1) Amount of FREE memory required reduced to 520K (532700 BYTES)
     2) Hot keys:
                F1: Load GIF file
                F2: Load XTS file
                F3: Save as XTS file
                F4: Save as GIF file
                F5: Change directory
                F6: Change drive
                F7: Scale
                F8: not used
                F9: Save as XTS and exit
                F10: "quit" - no save just get out
                F11: Clear grid
                F12: Toggle black symbols/color symbols
     3) There's a new menu INFORMATION, included in this is:
           WIDTH: - # of stitches/pixels wide value set when loading image
           HEIGHT: - # of stitches/pixels high value set when loading image
           STITCHES/INCH: - user set value (see below)
           ROWS/INCH: - user set value (see below)
           INCHES WIDE: - computed value width divided by stitches/inch
           INCHES HIGH: - computer value height divided by rows/inch
           DASH LINES VERTICAL: - # of solid lines between dash lines
           DASH LINE HORIZONTAL:  # of solid lines between dash lines
           SAVE AS DEFAULT CONFIGURATION FILE - see below
           RESTORE DEFAULT CONFIGURATION - see below

     4) All GIF view give "true" picture. You can "scroll" up/down and
        left/right.
     5) Scale Function: This function is accessible from either the EDIT menu,
        or F7. A GIF view of the image is presented with a menu across the top.
        You can change the size of the image by selecting a menu option.  The
        image is NOT save until you select "save". Hitting ESC will terminate
        this option.
     6) Print: You can now print either directly to a 9-pin printer, or
        create a GIF file of the charted image. If you "select section" you
        will be presented with a GIF image, and a selection box. You can
        move and/or re-size the box to select the area you with to print.
     7) SETPRINT - This standalone program is used to create the print
        configuration file. MUST BE RUN AT LEAST ONCE IF YOU PLAN TO PRINT
        DIRECTLY TO PRINTER. You select manufacturer and model of printer
        you will be using, or emulating. A quick test of the printer is
        optional.

May 1992 - Version 2.0
     1) Mouse can now control the cursor movement
     2) There is a second option bar to be used with the mouse
     3) 253 different symbols
     4) Changes to EDIT MENU
     5) Automatically scroll the VIEW image if the box moves past the
        visible section of the image.

April 1992 - Version 1.0
